Smart Technologies SMART Board D600 - Manual (Page 45)

37 | CHAPTER 4 – USING AND MAINTAINING YOUR SMART BOARD INTERACTIVE
WHITEBOARD
The Ready Light
You can see the Ready light in the lower-right corner of your interactive whiteboard’s
frame. The Ready light indicates the controller module’s operating states.
The following table shows the Ready light’s normal states. If the indicator’s behavior
doesn’t match a state listed here, refer to Troubleshooting Using the Ready Light
starting on page 41.
Ready Light State Meaning
Solid red Your interactive whiteboard is receiving power from
the USB cable or an optional expansion module’s
power adapter, but your interactive whiteboard isn’t
communicating with a computer.
Solid green Your interactive whiteboard is receiving power and
is communicating successfully with SMART Product
Drivers.
Flashing green Your interactive whiteboard is receiving power and
is communicating successfully with the USB HID
driver of your computer’s operating system.
NOTE
In HID mode, interactive whiteboard tools such
as the pens and the eraser don’t work, but you
can move the mouse pointer and perform
mouse functions by touching the interactive
screen. The Right-Click button on the pen tray
might work, depending on the version of
Windows operating system you’re using.
Neither the Keyboard nor the Help button will
work.
Flashing or solid amber The controller module is in a service mode or has
detected a software error. Refer to Troubleshooting
Using the Ready Light on page 41.
Ready Light