Sherwood D-480 - Manual (Page 14)

ENGLISH
14
SELECTING A COUNTER MODE
Press the DUBBING MODE button to
select the normal or high speed(1.5 times
normal speed) dubbing.
3
To stop dubbing.
4
High quality sound will be obtained in the nomal
speed dubbing mode.
Then dubbing will start.
NOTE
During dubbing, the Dolby NR is automatically set to OFF and the recorded tape can be dubbed as it is.
During dubbing, do not change the speed. If so, tape click noise may be recorded.
During dubbing, the settings of the REC LEVEL and the REC BALANCE controls are ignored.
There are two kinds of counter mode: tape counter, time counter for displaying the elapsed recording or playback time.
Select the desired counter mode.
Each time this button is pressed, the counter mode
changes as follows;
Example : When selecting the time counter.
TAPE COUNTER mode
TIME COUNTER mode
TAPE COUNTER TIME COUNTER
DUBBING
HIGH NORMAL
B C
NORM HIGH
SYN MPX MIN SEC
RELAY
REC
P
CD
M
REC
L
R
dB - 00 -20 -10 -6 -3 0 +3 +6
B C
NORM HIGH
SYN MPX MIN SEC
RELAY
REC
P
CD
M
REC
L
R
dB - 00 -20 -10 -6 -3 0 +3 +6
MODE