Sherwood D-480 - Manual (Page 8)

PLAYING BACK TAPES
Operations
8
Press the POWER switch to turn the power on.
1
Insert the cassette with exposed tape side facing down. To close the cassette door, push the door
until it locks shut.
2
If the tape is recorded with Dolby NR system, select the corresponding Dolby NR system.
3
Normal tape : NOR is displayed.
Chrome tape : “CR” is displayed.
Metal tape : “ME” is displayed.
The type of a tape loaded is detected automatically by the auto tape selector and recording bias and
equalization are set automatically according to the characteristics of the tape such as normal, chrome or
metal tape.
According to the type of the tape loaded, you will see the following display(Auto Tape Selector).
Each time this button is pressed, the Dolby NR system changes as follows;
On commercial pre recorded cassette tapes, if Dolby NR or appears but Dolby C is not specified,
the tapes are recorded with the Dolby B NR.
ENGLISH
DOLBY B DOLBY C OFF
POWER
ON/OFF
EJECT
B C
NORM HIGH
SYN MPX MIN SEC
RELAY
REC
P
CD
M
REC
L
R
dB - 00 -20 -10 -6 -3 0 +3 +6
NR B/C/OFF