Sherwood D-480 - Manual (Page 17)

17
ENGLISH
Dolby noise reduction and HX Pro headroom extension manufactured under license from Dolby Laboratories
Licensing Corporation. HX Pro originated by Bang and Olufsen.
”Dolby”, the double-D symbol, and “HX Pro” are trademarks of Dolby Laboratories Licensing Corporation.
NOTES ON CASSETTE TAPE
Before loading a cassette tape, take up the slack in the
tape to prevent it from becoming entangled around the
capstan.
After the recording has been finished, remove the tab
to prevent the recorded contents from being erased or
recored on accidently.
For side B For side A
To rerecord after tabs have been removed, cover with
adhesive tape.
Do not store the tapes in direct sunlight or near equipment that generates heat. Keep the tapes away from any
magnetic fields.
Do not touch the tape surface. Store the tapes in their cases after use. Dust can cause contamination of the heads
resulting in noise.
CLEANING THE HEAD SECTION
Clean the head section about every 10 hours of use. Use a commercially available head cleaning tape.
For better recordings, you should clean the head section before every recording.
After cleaning the head section, do not load a tape until the cleared section is completely dry.
DEMAGNETIZING THE HEAD
Demagnetize the recording/playback head about every 10 hours of use with a commercially avaiable demagnetizer so that
the magnetized head may not cause the sound to be deteriorated.