Sony CMT-CP33MD - Manual (Page 33)

33
The MD Deck — Recording
Selecting the tracks
1
Press CD on the remote to switch the
function to CD.
2
Press PLAY MODE on the remote
repeatedly until “PGM” appears.
3
Press . or > on the remote
repeatedly until the desired track
number appears.
Recording on an MD
6
Insert a recordable MD.
7
Press SYNCHRO REC repeatedly until
“CD-MD SYNC” appears.
8
Press ENTER/START.
The MD deck stands by for recording and the
CD player pauses for play.
9
Press ENTER/START again.
CD playing and MD recording start.
When the recording is completed, the CD
player and the MD deck stop automatically.
To stop recording
Press CD x or MD x.
If the MD becomes full during
recording
The CD player and the MD deck stop
automatically.
To record on a tape at the same
time
Insert a blank tape and select “DUAL SYNC” in
step 7 of “Recording on an MD” on this page.
continued
Selected track
number Total playing time
4
Press ENTER/YES on the remote.
The track is programed.
“Step” appears, followed by the number of
the track in the programed sequence. The
number of the last programed track appears,
followed by the total playing time of the
program.
Last programed
track number Total playing time
5
To program additional tracks, repeat
steps 3 and 4.