Cd player – Sony CMT-CP33MD User Manual

Page 75

Advertising
background image

Additional Information

75

The timer does not function.

• Press CLOCK/TIMER SELECT to set the

timer and light up “DAILY” or “REC” in the
display (see pages 67 and 69).

• Check the set contents and set the correct time

(see pages 6, 66 and 68).

• Cancel the Sleep Timer function (see page

65).

The remote does not function.

• Remove the obstacle.
• Move the remote closer to the system.
• Point the remote at the system’s sensor.
• Replace the batteries (size AA/R6).
• Locate the system away from the fluorescent

light.

“PROTECT” and “PUSH POWER” appear
alternately.

• Press ?/1 (power) to turn off the system. Turn

on the system again after a while.

CD Player

The CD tray does not close.

• Place the CD correctly in the center of the

tray.

• Always close the tray by pressing CD Z.

Trying to push the tray closed with your
fingers may cause problems with the CD
player.

The CD does not eject.

• Consult your nearest Sony dealer.

Play does not start.

• Open the CD tray and check whether a CD is

loaded.

• Wipe the CD clean (see page 72).
• Replace the CD.
• The CD is placed with the label side down.

Place the CD correctly in the center of the
tray.

• Remove the CD and wipe away the moisture

on the CD, then leave the system turned on
for a few hours until the moisture evaporates.

• Press CD NX to start play.

The sound skips.

• Wipe the CD clean (see page 72).
• Replace the CD.
• Try moving the system to a place without

vibration (e.g., on top of a stable stand).

• Try moving the speakers away from the

system, or placing them on separate stands.
When you listen to a track with bass sounds at
high volume, the speaker vibration may cause
the sound to skip.

Play does not start from the first track.

• Press PLAY MODE repeatedly until “PGM”

or “SHUFFLE” disappears to return to normal
play.

“—OVER—” appears.

• Press and hold m or press . to return to

the desired playing position.

continued

Advertising