Samsung VP-D200(i) - Manual (Page 100)

100
ENGLISH ENGLISH
100 100
Maintenance
✤ At the end of a recording you must remove the power source.
✤ When recording with a Lithium Ion Battery Pack, leaving the pack on
the camcorder can reduce the life span of the battery. Hence, it should
be removed from the camcorder.
1. Slide the TAPE EJECT switch in the direction of
the arrow.
■ Opening the cassette door ejects the tape
automatically.
■ Please wait while the tape is completely
ejected.
2. After removing the tape, close the door and store
the camcorder in a dust free environment.
■ Dust and other foreign materials can cause square-shaped noise or
jerky images.
3. Set the power switch to the OFF mode.
4. Disconnect the power source or remove the Lithium Ion Battery Pack.
■ Press the BATTERY RELEASE button and slide the battery pack in
the direction of the arrow.
After finishing a recording
✤
✤
1. TAPE EJECT
■
■
2.
■
3. OFF
4.
■
1 2
3