Samsung VP-D200(i) - Manual (Page 8)

ENGLISH
Notes and Safety Instructions
8 8
Notes regarding the battery pack
- Make sure that the battery pack is fully charged
before starting to record.
- To preserve battery power, keep your
camcorder turned off when you are not
operating it.
- If your camcorder is in CAM mode, and it is
left in STBY mode without being operated for
more than 5 minutes with a tape installed, it
will automatically turn itself off to protect
against unnecessary battery discharge.
- Make sure that the battery pack is fitted firmly into place.
Dropping the battery pack may damage it.
- A brand new battery pack is not charged.
Before using the battery pack, you need to charge it completely.
- It is a good idea to use the viewfinder rather than the LCD when making
a long recordings, because the LCD uses up more battery power.
* When the battery reaches the end of its life, please contact your
local dealer. The batteries have to be dealt with as chemical waste.
- To ensure normal recording and a clear picture, clean the video heads
regularly. If a square block-shape distorts playback,
or only a blue screen is displayed, the video heads may be dirty.
If this happens, clean the video heads with a dry type cleaning cassette.
- Do not use a wet-type cleaning cassette. It may damage the video heads.
Notes regarding the Video Head Cleaning
-
-
- CAM
STBY 5
-
-
-
*
-
-