Samsung VP-D200(i) - Manual (Page 79)

79
ENGLISH ENGLISH
IEEE 1394 IEEE 1394 Data Transfer
● System requirements
■ CPU : faster Intel ® Pentium III™ 450Mhz compatible.
■ Operating system : Windows ® 98SE, ME, XP, Mac OS (9.1~10.2)
■ Main memory : more than 64 MB RAM
■ IEEE1394 add-on card or built in IEEE1394 card
Recording with a DV connection cable
(VP-D200i/D230i/D250i/D270i only)
1. Set the power switch to PLAYER mode.
2. Connect the DV cable (not supplied) from
the DV IN/OUTport of the camcorder to
the DV IN/OUTport of the other DV
device.
■ Make sure that DV IN appears on the
screen.
3. Press the START/STOP button to begin
REC PAUSE mode.
■ PAUSE is displayed on the OSD.
4. Start playback on the other DV device while you monitor the picture.
5. Press the START/STOP button to start recording.
■ If you want to pause recording momentarily, press the
START/STOP button again.
6. To stop recording, press the (STOP) button.
Notes
■ When using this camcorder as a recorder, the pictures that appear on a
monitor may seem uneven, however recorded pictures will not be
affected.
■ Operations are not guaranteed for all the recommanded computer
environments mentioned above.
●
■ CPU Intel ® Pentium III™ 450Mhz
■ Windows ® 98SE, ME, XP, Mac OS (9.1~10.2)
■ 64 MB RAM
■ IEEE1394 IEEE 1394
DV VP-D200i/D230i/D250i/D270i
1. PLAYER
2. DV
DV / DV
DV /
■ DV IN
3. START/STOP /
REC PAUSE
■ PAUSE OSD
4. DV
5. START/STOP /
■ START/STOP /
6. STOP
■
■