Samsung VP-D200(i) - Manual (Page 28)

Basic Recording
28
ENGLISH
Making your First Recording
1. Connect a Power source to the
camcorder. (see page 23)
(A battery pack or a AC power
adapter)
■ Insert a cassette.
(see page 27)
2. Remove the LENS CAP.
3. Set the power switch to the
CAM position.
■ Open the LCD monitor.
■ Set the mode switch to the
TAPE position.
(VP-D230(i)/D250(i)/D270(i) only)
Make sure that STBY is displayed.
■ If the protection tab of the cassette is open, STOP and
PROTECTION! will be displayed.
■ Make sure the image you want to record appears in the LCD
monitor or viewfinder.
■ Make sure the battery level indicates that there is enough remaining
power for your expected recording time.
4. To start recording, press the START/STOP button.
■ REC is displayed in the LCD.
To stop recording, press the START/STOP button again.
■ STBY is displayed in the LCD.
1.
23
■
27
2. LENS CAP
3. CAM
■ LCD
■ STBY
( VP-D230(i)/D250(i)/
D270(i))
■ STOP
PROTECTION
■ LCD
■
4. START/STOP /
■ REC
START/STOP /
■ STBY
FADE S.SHOW
4
1
3
2