Samsung VP-D200(i) - Manual (Page 60)

60
ENGLISH
Advanced Recording
60 60
ENGLISH DEUTSCH
✤ The EASY mode allows a beginner to easily make good recordings.
■ The EASY mode only operates in CAM mode.
1. Set the power switch to CAM mode.
2. By pressing the EASY button, all functions on the
camera will be set to off and the recording settings will
be set to the following basic modes:
■ Battery level, recording mode, counter, DATE/TIME,
and DIS (
) will be displayed.
■ The word “EASY.Q” will appear on the LCD at
the same time.
However, the DATE/TIME will only be seen if it has
been previously set. (see page 54)
3. Press START/STOP to start recording.
■ Recording will begin using the basic automatic
settings.
4. Pressing the EASY button again in the STBY mode and
then turns the EASY mode off.
■ The EASY function will not turn off when you have recording.
■ The camera will return to the settings that were set prior to
activating EASY mode.
Notes
■ In EASY mode, certain functions are not available, such as MENU,
BLC, MF/AF.
-
If you want to use these functions, you must first switch the EASY
mode off.
■ The EASY mode settings are deleted when the battery pack is
uninstalled from the camcorder and therefore, they must be reset when a
battery pack has been replaced.
EASY Mode (for Beginners)
✤ EASY
■ CAM EASY
1. CAM
2. EASY
■
DATE/TIME / DIS
■ EASY.Q
DATE/TIME /
DATE/TIME /
54
3. START/STOP /
■
4. STBY EASY
■ EASY
■ EASY
■ EASY MENU
BLC MF/AF /
- EASY
■ EASY
EASY
0 : 0 0 : 0 0
1 0 : 0 0
1 0 . J A N . 2 0 0 3
STBY
EASY
5 5 min
EASY
MULTI