Serial i/f screen – Sony Ericsson XCI-V3 User Manual

Page 21

Advertising

GUI application

Community: Community name administrated by the

SNMP manager

Description: Description of this unit
Location: Location of this unit
Contact: Administrator contact information

NTP (Network Time Protocol)

The protocol setting to synchronize the internal clock
of this unit with the NTP server is made in this area.
Input the time zone and effective NTP server. Press
the SYNCHRONIZE button to synchronize.

NTP Mode: Select “On” to synchronize internal clock

with by the NTP server.

Time Zone: Select your time zone.
Timeout: Timeout value
Sync Interval: Renewal cycle
NTP Server: NTP server address

Notes

• When NTP mode is set to “On”, you cannot change

the date and time in the GENERAL screen.

• When the network you are using is in your intranet

proxy connection environment, you cannot connect
this unit with a NTP server on the Internet.
Therefore, specify the NTP server operated in the
intranet.

SYNCHRONIZE button

This button is used to activate the synchronization of
the set values.

SAVE button

This button is used to save the currently set values.

CANCEL button

This button is used to cancel changes.

? (HELP) button

This button is used to display HELP information.

Software Keyboard

Enters alphabets or numbers.

Shortcut keys

When you connect a USB keyboard with this unit, you
can use the following shortcut keys in the NETWORK
screen:

Shortcut

Applicable button

Alt + D

DHCP

Alt + N

SYNCHRONIZE

Alt + S

SAVE

Alt + C

CANCEL

Alt + H

HELP

You can move between the items in the screen by
pressing the tab key.

SERIAL I/F screen

This screen is used for setting the serial interface
communication speed.

Baud Rate

Set the baud rate here.
You can select one of the following baud rates:
[4800, 9600, 19200, 38400, 57600, 115200] (bps)