Southbend SB1023 User Manual
Page 33
For Machines Mfg. Since 8/09
Model SB1023
-31-
M A I N T E N A N C E
4. Clean the lower column leadscrew section
with mineral spirits, dry with a rag, and
relubricate with any standard machine or
multipurpose grade grease (Figure 38).
Figure 38. Lower column leadscrew.
5. Wipe the table cross feed grease fitting clean
(Figure 39), and put two or three pumps
of grease into it. Wipe off any grease that
bleeds through the seams.
7. Clean the pinion, rack, bearings, ways, and
leadscrew with mineral spirits. Dry all parts,
and re-lubricate with white lithium grease.
8. With the help of your assistant,
CAREFULLY place the table back onto the
ways. DO NOT drop the table or you may
put a nick in a way and ruin it permanently.
Figure 40. Ball bearing ways.
Figure 41. Table ways and rack.
6. With the help of another person, lift the
table off the ways and set the table upside
down on a workbench (Figures 40-41).
Figure 39. Cross way grease fitting.
Grease Fitting