Southbend SB1023 - Manual (Page 46)

-44-
For Machines Mfg. Since 8/09 Model SB1023 P A R T S
301
302
303
304
305
306
307
308
309
310
311
312
314
315
313
Machine Labels
REF PART # DESCRIPTION REF PART # DESCRIPTION
301 PSB1023301 CONTROL PANEL LABEL 309 PSB1023309 MACHINE ID LABEL
302 PSB1023302 ROTATION LABEL 310 PSBLABEL02VL DISCONNECT POWER LABEL
303 SB1317 SOUTH BEND NAMEPLATE 1 36MM 311 PSBPAINT02 SB LIGHT BLUE TOUCH-UP PAINT
304 PSBPAINT01 SB GRAY TOUCH-UP PAINT 312 SB1321 SOUTH BEND NAMEPLATE 5 203MM
305 PSB1023305 TABLE TIP LABEL 313 PSBPAINT03 SB DARK BLUE TOUCH-UP PAINT
306 PSBLABEL01VS READ MANUAL LABEL 314 PSB1023314 MODEL NUMBER LABEL
307 PSBLABEL09VS FACESHIELD RESPIRATOR LABEL 315 PSB1023315 SOUTH BEND LOGO RECT
308 PSB1023308 110V 1-PH LABEL
The safety labels provided with your machine are used to make the operator aware of the
machine hazards and ways to prevent injury. The owner of this machine MUST maintain the
original location and readability of these safety labels. If any label is removed or becomes
unreadable, REPLACE that label before using the machine again. Contact South Bend Lathe Co. at
(360) 734-1540 or www.southbendlathe.com to order new labels.