Sanyo SRT-2400DC - Manual (Page 28)

PROGRAM TIMER RECORDING
There are two program timer recording methods, daily
recording or recording on certain days of the week.
Example 1: To record on every Saturday from 9:00
AM to 5:00 PM (17:00), in 24-hour
mode (recording speed).
•
Follow the Before starting steps, under “NORMAL
RECORDING”.
1
Press the MENU button until the (TIMER SET) menu
is displayed.
•
“SUN” (Sunday) will be flashing.
@@@@@@<TIMER@SET>
WEEK@START@@STOP@@@SPD
SUN@@--:--@@--:--@@---@N
MON@@--:--@@--:--@@---@N
TUE@@--:--@@--:--@@---@N
WED@@--:--@@--:--@@---@N
THU@@--:--@@--:--@@---@N
FRI@@--:--@@--:--@@---@N
SAT@@--:--@@--:--@@---@N
DLY@@--:--@@--:--@@---@N
2
Press the ] button, until “SAT” (Saturday) is flashing.
3
Press the * button.
° The recording start hour position starts flashing.
4
Press the l (or j ) button to set the recording start
hour (ex: 09), then press the * button.
° The recording start minutes position starts
flashing.
5
Press the l (or j ) button to set the recording start
minutes (ex: 00), then press the * button.
° The recording stop hour position starts flashing.
6
Press the l (or j ) button to set the recording stop
hour (ex: 17), then press the * button.
° The recording stop minutes position starts
flashing.
7
Press the l (or j ) button to set the recording stop
minutes (ex: 00), then press the * button.
° The “SPD” (recording speed) position will start
flashing.
NOTE:
•
If the set stop time is earlier than or the same time
as the set start time, the VCR will consider the stop
time to be the following day, and “T” will be
displayed next to the recording stop time.
8
Press the l (or j ) button to select the recording
speed mode (ex: 24), then press the * button.
° “N” will start flashing.
9
Press the l (or j ) button to select the desired
program timer recording mode.
Y. . . . . . . . . . . recording will take place
N . . . . . . . . . . recording will not take place
@@@@@@<TIMER@SET>
WEEK@START@@STOP@@@SPD
SUN@@--:--@@--:--@@---@N
MON@@--:--@@--:--@@---@N
TUE@@--:--@@--:--@@---@N
WED@@--:--@@--:--@@---@N
THU@@--:--@@--:--@@---@N
FRI@@--:--@@--:--@@---@N
SAT@@09:00@@17:00@@@24@Y
DLY@@--:--@@--:--@@---@N
° Repeat steps 2 to 9 to program timer
recordings for other days of the week.
F
Press the PAUSE/SEARCH button to save the
settings.
G
Press the TIMER button.
° The timer recording indicator “ n ” will light on the
digital display, the VCR is now in timer recording
stand-by mode.
NOTES:
•
To modify, cancel or stop timer recording, press the
TIMER button to cancel the timer recording mode.
•
To record everyday at the same time, at step 2
select the “DLY” line.
NU4QG/NA3 (SRT-2400DC GB) Mon. Sept., 17/2001
English 27