Figure 21. reset pulse width, Table 35. description of the wdrst bits – ST & T UPSD3212C User Manual
Page 47
47/163
uPSD3212A, uPSD3212C, uPSD3212CV
Watchdog reset pulse width depends on the clock
frequency. The reset period is Tf
OSC
x 12 x 2
22
.
The RESET pulse width is Tf
OSC
x 12 x 2
15
.
Figure 21. RESET Pulse Width
Table 34. Watchdog Timer Clear Register (WDRST: 0A6H)
Table 35. Description of the WDRST Bits
Note: The Watchdog Timer (WDT) is enabled at power-up or reset and must be served or disabled.
7
6
5
4
3
2
1
0
Reserved
WDRST6
WDRST5
WDRST4
WDRST3
WDRST2
WDRST1
WDRST0
Bit
Symbol
Function
7
—
Reserved
6 to 0
WDRST6 to
WDRST0
To reset Watchdog Timer, write any value beteen 00h and 7Eh to this register.
This value is loaded to the 7 most significant bits of the 22-bit counter.
For example: MOV WDRST,#1EH
Reset period
(1.258 second at 40Mhz)
(about 6.291 seconds at 8Mhz)
Reset pulse width (about 10ms at 40Mhz, about 50ms at 8Mhz)
AI06823