ST & T UPSD3212C - Manual (Page 150)

uPSD3212A, uPSD3212C, uPSD3212CV
150/163
Table 131. Program, WRITE and Erase Times (5V Devices)
Note: 1. Programmed to all zero before erase.
2. The polling status, DQ7, is valid t Q7VQV time units before the data byte, DQ0-DQ7, is valid for reading.
Table 132. Program, WRITE and Erase Times (3V Devices)
Note: 1. Programmed to all zero before erase.
2. The polling status, DQ7, is valid t Q7VQV time units before the data byte, DQ0-DQ7, is valid for reading.
Symbol Parameter Min. Typ. Max. Unit
Flash Program 8.5 s
Flash Bulk Erase (1) (pre-programmed) 3 30 s
Flash Bulk Erase (not pre-programmed) 5 s
t
WHQV3 Sector Erase (pre-programmed) 1 30 s
t WHQV2 Sector Erase (not pre-programmed) 2.2 s
t
WHQV1
Byte Program 14 150 µs
Program / Erase Cycles (per Sector) 100,000 cycles
t
WHWLO
Sector Erase Time-out 100 µs
t
Q7VQV DQ7 Valid to Output (DQ7-DQ0) Valid (Data Polling)
(2) 30 ns
Symbol Parameter Min. Typ. Max. Unit
Flash Program 8.5 s
Flash Bulk Erase
(1)
(pre-programmed) 3 30 s
Flash Bulk Erase (not pre-programmed) 5 s
t
WHQV3 Sector Erase (pre-programmed) 1 30 s
t
WHQV2 Sector Erase (not pre-programmed) 2.2 s
t WHQV1 Byte Program 14 150 µs
Program / Erase Cycles (per Sector) 100,000 cycles
t
WHWLO Sector Erase Time-out 100 µs
t
Q7VQV DQ7 Valid to Output (DQ7-DQ0) Valid (Data Polling)
(2) 30 ns