Star Micronics SP298 Series - Manual (Page 7)

4
ENGLISH
Removing the printer cover
❏
Push straight up on the ridged locations on the sides of the printer cover to
remove it from the printer.
❏
To replace the cover, slide it back down into position. Gently press down on
the cover until you hear it click securely into place.
Installing the ribbon cassette
❏
Make sure that the printer’s paper release is activated (the paper is not held
in place by the paper feed roller). If it cannot be determined whether or not
the paper release is activated, turn on the printer and check if the
RELEASE indicator on the control panel is lit. If the indicator is not lit,
press the RELEASE button until the indicator lights up.
❏
Make sure that the printer is turned off and unplugged from its power
outlet.
❏
Remove the printer cover.
❏
Remove the ribbon cassette from its packaging, and turn its knob in the
direction indicated by the arrow to take up any slack in the ribbon.
Printer cover