Star Micronics SP298 Series - Manual (Page 8)

5
ENGLISH
❏
Holding the ribbon cassette so that the ribbon is facing down, install the
cassette into the slip printer as shown in the illustration.
❏
Press gently but firmly on the cassette until it snaps securely into place.
❏
Rotate the knob on the cassette again to take up any slack.
❏
Replace the printer cover.
Important!
Make sure that the ribbon is not twisted before installing the ribbon cassette.
Otherwise, the ribbon may become jammed in the printer and damage the
ribbon rollers.
In addition, if the ribbon becomes twisted after installation, remove the ribbon
cassette, untwist the ribbon, and then reinstall the cassette.
<Correct: Ribbon is not twisted> <Incorrect: Ribbon is twisted>