Siemens Gigaset SL 740 - Manual (Page 45)

44
Operating more than one handset
SL 740/SL 745 / IM-englisch / A31008-L740-N102-1-7619 / registration.fm / 15.07.2004
Changing previously set external "call
to" numbers
v
¢
í
¢
Room Monitor
s Scroll to the Call to: line.
Edit Press the display key.
X Delete existing number.
Enter the external destination number:
~
Enter the new number.
© Press display key to open
menu.
Save Entry Select and press OK . The entry
is stored.
You can also enter an internal number as
the "call to" number: INT
¢
s (Select
handset) OK .
Continue as described on page 43 starting
with step 4.
Changing a previously set internal
"call to" number
v
¢
í
¢
Room Monitor
s Scroll to the Call to: line.
Edit Press the display key.
Yes Press the display key to
confirm the prompt.
Edit Press the display key. The input
field for the phone number is
opened.
Enter an external number as the "call to"
number:
~ Enter
number.
© Press display key to open
menu.
Save Entry Select and press OK . The entry
is stored.
You can also enter an internal number as
the "call to" number: INT
¢
s (Select
handset) OK .
Continue as described on page 43 starting
with step 4.
Deactivating the room monitor
remotely
Take the call from the room monitor and
press the 9 ; keys. The room monitor
function will deactivate around
90 seconds after the call ends. After this,
the room monitor will make no further
calls. The other room monitor functions
on the handset (e.g. no ringer) will remain
activated until you press the display key Off
on the handset.
To reactivate the room monitor function
with the same telephone number, you
must turn on the activation again and save
with Save .
Setting the Walk and Talk mode
The Walk and Talk function allows two
handsets to communicate with each other
no matter how far they are from the base
station.
Example: You go on holiday and take two
handsets with Walk and Talk functionality
with you. Set the Walk and Talk function
on both handsets.
Precondition:
u Both handsets have been registered to
the same base station or
u Both handsets are registered to
different base stations and both are set
to Best Base (p. 41) or
u One of the handsets is not registered to
any base station and the registered
handset is set to Best Base or
u Neither handset is registered to a base
station.
Please remember:
u The maximum range between
handsets in Walk and Talk mode is
300 metres outdoors.
u The handsets cannot be reached by
incoming calls.
u Handset operating times are severely
curtailed in Walk and Talk mode.