SharkRack KVM-8 - Manual (Page 24)

KVM-8 Installer/User Guide
18
On-Screen Display Operations
19
5. After selecting “ID Setup”, use the arrow keys, position the ID window to where you
would like it to appear when this channel is selected. Then press Enter. (For further
information see “The ID Window” later in this chapter.)
6. Select “Save Changes” and press Enter to accept.
Press Esc at any point to exit this operation without saving the changes.
Deleting an existing channel
1. Highlight the channel you wish to delete in the main OSD window.
2. Press the Control key twice to access the Command Menu or simply press the
Delete key. (If you press Delete, skip step 3.)
3. Choose the “Delete Channel” option.
4. Type Y or N at the prompt to confirm the deletion and press Enter.
The ID Window
The ID window appears when you change channels and displays the name of the
selected channel. This window can be individually configured for each channel in your
system. The characteristics of the ID window can be changed from the Edit Channel
Menu. This option is only available if you are operating in non-secure mode or if you
are the system administrator.
Changing the size, color and position of the ID window
1. Highlight the channel you wish to change in the main OSD window.
2. From the main OSD window, press the Control key twice to access the Command
Menu or press F3. (If you press F3, skip Step 3.)
3. Select “Edit Channel” from the Command Menu.
4. Choose the option “ID Setup.”