SharkRack KVM-8 - Manual (Page 35)

KVM-8 Installer/User Guide
28
Channel Scanning
29
To add a channel to the Scan list
1. Press the F2 key to open a new selection.
2. Type the address of the channel to add to the list. The dwell time and channel name
are updated automatically by the channel configuration menu.
3. Press Enter to save the new entry or Esc to cancel.
To delete a channel from the Scan List
1. Use the arrow keys to highlight the channel that you wish to delete.
2. Press the F3 key.
3. Press Enter to confirm the deletion.