Siemens C56 - Manual (Page 24)

Making a phone call
23
Accept the waiting call
§Swap§ Accept the waiting call
and place the current call
on hold. To swap be-
tween the two calls, pro-
ceed as above.
End the current call:
 Press. The following que-
ry is displayed: "Return to
the call on hold?"
§Yes§ Return to the held call.
Or
§No§ The held call is ended.
Reject waiting call
§Reject§ Reject the waiting call.
The caller hears the busy
tone.
Or
§Call fwd.§ If this is set, the waiting
call will be forwarded to
the voicemail for example
(setting, p. 67).
End current call
 End the current call.
§Answer§ Accept the new call.
Multi party
Call up to 5 parties one by one and
link them together in a phone con-
ference. Some of the functions de-
scribed may not be supported by
your service provider or may have to
be enabled specially.
You have established a connection:
y menu§ Open menu and select
Hold . The current call is
put on hold. Now dial a
new number. When the
new connection is estab-
lished ...
y menu§ ... open menu and select
Multi party . The held call is
joined.
Repeat procedure until all partici-
pants are linked together (up to
5 participants).
End
 All calls in the conference
are ended simultaneously
when the End key is
pressed.