Siemens C56 - Manual (Page 70)

Setup
69
§Menu§ Setup Phone setup
Select a function.
Fact. settings
The phone is reset to the default val-
ues (factory setting) (does not apply
to SIM card and network settings).
Alternative input in standby mode:
*
# 9 9 9 9 #

Phone identity
The phone ID (IMEI) is displayed. This
information may be useful for cus-
tomer service.
Alternatively enter in standby mode:
*
# 0 6 #
Clock
§Menu§ Setup Clock
Select a function.
Time/date
The clock must be set correctly once
at start-up.
§Edit§ Press.
First enter the date (day/
month/year), then the
time (24 hours, including
seconds).
Format date
DD.MM.YYYY or MM.DD.YYYY
12-hr Mode / 24-hr Mode
The format can be changed to 12
hour mode or 24 hour mode.
Auto display
The time display in standby mode
can be switched on and off.
Note
If the battery is removed for more than
about 30 seconds, the clock must be reset.
Setting of the date format to:
DD: Day (2-digit)
MM: Month (2-digit)
YYYY: Year (4 digit)