Siemens C56 - Manual (Page 75)

Setup
74
Fax/data mode using a PC
§Menu§ Setup Connectivity
Fax/data mod.
Select a function.
With the phone and a connected PC,
you can transmit and receive faxes
and data. Appropriate software for
data communication/fax communi-
cation must be available on your PC
and there must be a connection to
the phone.
Fax and data services must be ena-
bled by the service provider. Differ-
ent networks support different types
of fax/data reception; please contact
your service provider for details.
§Edit§ Set the required mode.
Send vce/fax
Set this function on the phone
before transmission so that you can
switch from voice mode to fax
mode.
While the connection is being setup,
the following function is available
for two seconds:
§Voice/fx§ Switch to Send vce/fax
mode; you may now send
a fax.
Voice/fax rec
(Only if a special fax or data number
is not available).
Start the required communication
program in your PC and switch on
the function at the phone during the
call (the PC accepts the connection).
Rec fax/data
Your service provider has given you a
number for telephoning and a fax/
data number.
The call is signalled by a special ring-
er and the type of call (fax or data) is
displayed.
Now start the communication pro-
gram in your PC to receive the fax/
data.