Siemens C56 - Manual (Page 72)

Setup
71
WAP profile settings
Up to 5 WAP profiles can be set (may
be barred by the service provider).
The entries may vary depending on
your service provider. To set a new
profile:

Select profile.
§Edit§ Open menu.

Select profile range and
make your settings/en-
tries field by field.
§Edit§ The entry card is dis-
played.
If necessary, check with your service
provider for details:
§Save§ The settings are stored
and the profile list is
shown.
Activate the set WAP
profile (p. 42).
Profile
name:
Enter/change name.
WAP Pa-
rameters
IP address: * Enter IP
address.
Port: * Enter port number.
Homepage: Enter homepage
(p. 40), if not set by the service
provider.
Linger time: Enter time in
seconds after which a connec-
tion should be ended if no in-
put or data exchange takes
place.
*) depends on the service
provider, if necessary enter
2nd IP address and 2nd
port.
CSD set-
tings
(Circuit
Switched
Data)
Dial-up no.: Enter ISP
number.
Call type: Select ISDN or
Analogue.
Login name: Enter login
name.
Password: Enter password
(shown as a series of
asterisks).
GPRS
settings
(General
Packet
Radio
Service)
GPRS deactivated: Yes/No.
APN: Enter the address of
your service provider.
Login name: Enter login
name.
Password: Enter password
(shown as a series of
asterisks)