Symbol Technologies 72E-86039-04 - Manual (Page 283)

Advanced Data Formatting 15 - 7
Special Commands
Pause Duration
Use this parameter, along with Send Pause on page 15-30, to insert a pause in the data transmission. Set the
pause by scanning a two-digit number (i.e., two bar codes) from Appendix D, Numeric Bar Codes in 0.1 second
intervals. For example, scanning bar codes 0 and 1 inserts a 0.1 second pause; 0 and 5 inserts a 0.5 second delay.
To correct an error or change a selection, scan
Cancel on page D-2 .
Pause Duration
Begin New Rule
Scan the bar code below to start entering a new rule
.
Begin New Rule
Send Graphic User Interface (GUI) Characters 15-82
Send GUI 0 - Send GUI 9 15-82
Send GUI A - Send GUI Z 15-83
Turn On/Off Rule Sets 15-87
Alphanumeric Keyboard 15-89
Space - ‘ 15-89
0 - 9 15-93
A - Z 15-94
Cancel 15-98
End of Message 15-98
a - z 15-98
{ - ~ 15-102
Table 15-1 ADF Bar Codes (Continued)
Parameter
Page
Number