Symbol Technologies 72E-86039-04 - Manual (Page 89)

Chapter 8 IBM 468X / 469X Interface
Introduction
This chapter describes how to set up the digital scanner with an IBM 468X/469X host.
Throughout the programming bar code menus, asterisks (
*
) indicate default values.
*
Disable Convert to Code 39
Feature/Option * Indicates Default
NOTE Most computer monitors allow scanning the bar codes directly on the screen. When scanning from the
screen, be sure to set the document magnification to a level where you can see the bar code clearly, and
bars and/or spaces are not merging.