Kenwood HM-535 - Manual (Page 13)

System connection
13 EN
30˚ 30˚
After plugging the power cord of this unit, press the
POWER ( ) key of the remote control unit to turn
the system ON. When the system is turned ON,
press the key of the function to be operated.
Operation
÷ When pressing more than one remote control keys
successively, press the keys securely by leaving an in-
terval of 1 second or more between keys.
÷ The provided batteries are intended for use in operation checking, and their service life may be short.
÷ When the remote controllable distance becomes short, replace both of the batteries with new ones.
÷ If direct sunlight or the light of a high-frequency fluorescent lamp (inverter type, etc.) is incident to the remote
sensor, malfunction may occur. In such a case, change the installation position to avoid malfunction.
Operating range (approx.)
Remote sensor
Loading batteries
1
Remove the cover.
2
Insert batteries.
3
Close the cover.
÷ Insert two R6 ("AA"-size) batteries following the polarity indications.
6 m
Controls and indicators
RANDOM key (CD) ¤
Press for setting playback of tracks in a random order.
6
VOLUME keys $
Press to adjust the volume.
7 Numeric keys &™
Used to select a CD track number or recall a preset
station of the tuner.
8 ÷ PTY ÷ TIME DISPLAY key (For Europe and U.K.)
&¢
Used at the time of program type detection.
Press to switch the displayed time information on CD.
TIME DISPLAY key (For other countries)
&
Press to switch the displayed time information on CD.
9
SOUND key %
Press to switch the sound effect to EX.BASS or
LOUD.
TONE key %
Press to adjust the tone.
0
MUTE key %
Press to mute the audio temporarily.
5240/06-13/EN 3/9/02, 7:21 PM 13