Select the program timer on/off, Set the on time then the off time – Kenwood HM-535 User Manual
Page 40
Timer operation
40
EN
Select the program timer ON/OFF.
÷ If OFF is selected, the key function return to ordinary
mode.
3
1
Select "ON ?" or "OFF ?"
2
Set it.
Select ONETIME or EVERYDAY execution of the programed timer.
÷ In the ONETIME mode, the timer is set OFF after
execution.
÷ In the EVERYDAY mode, the timer is executed every-
day.
4
1
Select "ONETIME" or "EVERYDAY"
2
Set it.
Set the ON time then the OFF time.
÷ In other areas than the U.K. and Europe the clock
shows the time of the day in the 12-hour system.
÷ For each of the ON time and OFF time, enter the figure
of "hour" by performing steps
1 and 2 then enter the
figure of "minute" in the same manner.
÷ If you make a mistake, press the mode key and restart
from step
2.
5
1
Adjust the time.
2
Set it.
The time is
advanced
The time is
returned
5240/36-42/EN
3/9/02, 7:25 PM
40