Kawai CONCERT ARTIST CA63 - Manual (Page 20)

20
P
la
y
ing
the
P
iano
Split Mode
The Split Mode function divides the keyboard into two sections, allowing each section to be played with a
different sound. For example, a bass sound in the lower section, and a piano sound in the upper section.
„ Entering split mode
Press the SPLIT button.
The LED indicator for the SPLIT button will turn on to indicate
that split mode has been enabled. In addition, the LED indicator
for the upper section sound will also turn on, while the LED
indicator for the for the lower section sound will start to flash.
The name of the upper section and lower section sounds
will also be shown in the LCD display, with a slash symbol (/)
indicating that split mode is in use.
Concert Grand
/ Wood Bass
split mode currently in use
„ Changing the upper/lower section sound
Press a SOUND SELECT button to select the desired sound for
the upper section.
Press and hold the SPLIT button, then press a SOUND SELECT
button to select the desired sound for the lower section.
„ Adjusting the upper/lower section volume
Press the e or f buttons to adjust the volume balance
between the upper and lower section sounds.
„ Exiting split mode
Press the SPLIT button to exit split mode.
The LED indicator for the SPLIT button will turn off, and the name of the selected sound will be shown in the LCD display.
„ Changing the split point
Press and hold the SPLIT button, then press a key on the keyboard.
The name of the pressed key will be shown in the LED display, and will become the new split point.
* The default split point is set between keys B2 and C3.
Lower section
Upper section
New split point
hold