Kawai CONCERT ARTIST CA63 - Manual (Page 78)

78
Set
tings
2
Save Song
The Save Song function allows recorder songs stored in the instrument’s internal memory to be saved to a
USB memory device. Once saved, this data can be played back or edited using computer software.
1. Selecting the Save Song function
Enter the USB menu (page 76).
Press the e or f buttons to select the Save Song function,
then press the FUNCTION button.
2. Selecting the song to be saved
Press the c or d buttons to select the recorder song to be saved
to a USB memory device.
If the selected recorder song contains song data, a ¿ symbol
will be shown.
Press the FUNCTION button.
3. Naming the song
Press the c or d buttons to cycle through the alphanumeric
characters, and the e or f buttons to move the cursor.
Press the FUNCTION button.
4. Saving the song
A confirmation message will be shown in the LCD display,
prompting to confirm the save song operation.
Press the e or f buttons to cancel or confirm the operation.
* Saved songs are limited to a maximum name length of 12 characters.
* The saved song file will be stored in the root folder of the USB memory
device. It is not possible to store the song file in a different folder.
* Renaming or re-saving the song file using a computer may prevent the
song from being loaded into the instrument’s internal memory.
5. Exiting the Save Song function
Press a SOUND SELECT button to exit the Save Song function
and return to normal operation
5-1 Save Song
≥Press[F]
Save Song
Song 1*
Name ? ≥Press[F]
IntSong_1
Are you sure?
≤No
Yes≥
USB Menu
Song contains
recorder data