Kawai CONCERT ARTIST CA63 - Manual (Page 23)

23
P
la
y
ing
the
P
iano
Registration Memories
The Registration function allows the current instrument setup (sound selections, split point, reverb and effect
settings, and various other panel options) to be stored in one of eight registration memories, and conveniently
recalled at the touch of a button.
Sound settings
Selected sound (including dual and split mode settings)
Effect and Reverb settings
Virtual Technician settings
Voicing
Damper Resonance
String Resonance
Key-off Effect
Touch Curve
Temperament
Stretch Tuning
Tone settings
Tone Control
Wall EQ
Tuning
Damper Hold on/off
Keyboard settings
Lower Octave Shift
Lower Pedal on/off
Layer Octave Shift
Layer Dynamics
„ Selecting a registration
Press the REGISTRATION button.
The LED indicator for the REGISTRATION button will turn on
to indicate that the registration function is in use, and the
sound(s) for the currently selected registration memory will
be shown in the LCD display.
Press one of the REGISTRATION SELECT buttons (i.e. SOUND
SELECT buttons) numbered from 1-8 to select a memory.
Press the REGISTRATION button to return to normal operation.
The LED indicator for the REGISTRATION button will turn off.
„ Storing a registration
Press and hold the REGISTRATION button for a few seconds.
The REGISTRATION (SOUND) SELECT buttons will start to flash.
Press one of the REGISTRATION (SOUND) SELECT buttons to
select the memory in which to store the new registration.
A beep will sound to confirm that the registration has been
stored in the selected memory.
„ Resetting all registrations
Press and hold the REGISTRATION and PLAY/STOP buttons, then turn the instrument’s power off/on.
All registrations will be reset to the factory default settings.
Save Regist to
Select 1 - 8 Save Regist to
Select 1 - 8
„ Settings stored in registration memories
hold