Kawai CONCERT ARTIST CA63 - Manual (Page 41)

41
Re
corde
r
4. Stopping the audio recorder, saving to USB
Press the PLAY/STOP button.
The LED indicators for the PLAY/STOP and REC buttons will
turn off, and recording will stop
A confirmation message will be shown in the LCD display,
prompting to confirm the save operation.
Save to USB?
≤No
Yes≥
Press the e or f buttons to cancel or confirm the operation.
5. Naming the recorded audio file, confirming save
After confirming the save operation:
Press the c or d buttons to cycle through the alphanumeric
characters, and the e or f buttons to move the cursor.
Name: Press[F]
MP3 Song 01
Press the FUNCTION button.
A final confirmation message will be shown in the LCD display,
prompting to confirm the save operation.
Are you sure?
≤No
Yes≥
Press the e or f buttons to cancel or confirm the operation.
The recorded audio file will be saved with the specified name.
After a few seconds, the Play Audio screen will be shown in the
LCD display, indicating that the audio is ready for playback.
„ Overwriting the file
If the specified name already exists:
A confirmation message will be shown in the LCD display,
prompting to confirm or cancel the overwrite operation.
Overwrite file?
≤No
Yes≥
Press the e or f buttons to cancel or confirm the operation.
* If cancelled, the audio recorder will return to the saving screen (step 4).
Save (Yes)
Cancel (No)
Save (Yes)
Cancel (No)
Select the character
Move the cursor
Select the character
Move the cursor
Overwrite (Yes)
Cancel (No)
Overwrite (Yes)
Cancel (No)
* ‘MP3 Song 01’ or ‘WAV Song 01’ will be used as the default name for the
recorded audio files, with the number increasing automatically.
* New files are limited to a maximum name length of 12 characters.
* The saved audio file will be stored in the root folder of the USB memory
device. It is not possible to store the file in a different folder.
* The audio recorder will only record sounds produced by the instrument.
Devices connected via the LINE IN jacks will not be recorded.