Konftel 300W - Manual (Page 11)

9
sElECT ConnECTiViTy oPTion WiTH THE linE MoDE
The unit is pre-programmed for a DECT connection but it is possible to switch between
and combine all available connectivity options.
 Press the linE MoDE key.
 Select the connection you want and press oK to confirm.
The box in front of the selected option is filled in which indicates that this connectivity option
can be used for calls.
 Press the linE MoDE key again to close the line mode.
Remove a connectivity option in the same way.
 If you have selected MOBILE, you connect the call on the mobile phone and via
USB use a software program in the PC (see pages 14 and 15).
 You can add another line, end a line or switch between connected lines during a
call.
UsinG A CoMPUTER
When connected to the PC, the Konftel 300W acts as a loudspeaker and microphone
when making VoIP calls. VoIP calls are transmitted as data packets over the network/
Internet. For calls via PCs, you need VoIP software (e.g. Skype
® ) or a service for web
meetings whereby several users can communicate and share documents via their web
browser or special client software.
 Connect the Konftel 300W to a computer using the USB cable provided.
 Select Konftel 300W Usb Audio as the sound unit in the computer’s settings.
 Press the linE MoDE key.
 Select Usb and press oK to confirm.
GEnERAl