Konftel 300W - Manual (Page 17)

15
 Indicate whether you want to connect a call with one user or several users in the
computer’s VoIP software.
The Konftel 300W functions as a speaker and microphone for the computer.
Answering a VoiP call
 Press .
The Konftel 300W has now been put into call mode and the LEDs show a steady blue light.
 Indicate whether you want to start the call by answering in the computer’s VoIP
software.
The Konftel 300W functions as a speaker and microphone for the computer.
Ending a VoiP call
 End the call in the computer’s VoIP software and put the Konftel 300W on stand-by
by pressing .
The Konftel 300W now only functions as a speaker for the computer.
CAlls ViA MobilE PHonEs
For these instructions, it is assumed that the Konftel 300W is connected to a mobile
phone via a cable (optional accessory).
select mobile as the telephone line
 Press linE MoDE and select MOBILE as a phone line. Press oK to confirm.
The box in front of MOBILE is filled in which indicates that this connectivity option can be used
for calls.
 Other connectivity options can be deselected in the same way if they are not going
to be used.
 You can combine all available connectivity options.
 Press the linE MoDE key again to close the line mode.
 You can add another line, end a line or switch between connected lines during a call.
Making calls using a mobile phone
 Press to activate Konftel 300W.
 Dial the number on the mobile phone as you normally would.
The Konftel 300W now functions as a speaker and microphone for the mobile phone. The LEDs
show a steady blue light.
Ending calls
 Ending the call on the mobile phone.
 Press to turn off the Konftel 300W.
AnsWERinG AnD MAKinG CAlls