Konftel 300W - Manual (Page 30)

28
ADJUsTinG DATE AnD TiME
Changing the date
 Select MEnU > sETTinGs > TiME DATE > DATE (2,4,1).
 Change the flashing figures for the year using the arrow buttons or by entering the
figures on the keypad. Press oK to confirm and to continue to the month, and then
proceed in the same way for the day.
Changing the time
 Select MEnU > sETTinGs > TiME DATE > TiME (2,4,2).
 Change the flashing figures for the hour using the arrow buttons or by entering the
figures on the keypad. Press oK to confirm and to continue to minutes.
Changing the time format
 Select MEnU > sETTinGs > TiME DATE > TiME foRMAT (2,4,4).
 Select either a 12-hour or a 24-hour format using the arrow buttons and press oK
to confirm your choice.
ADJUsTinG RinG lEVEl VolUME
 Select MEnU > sETTinGs > RinG lEVEl (2,5).
 Select your choice and press oK to confirm.
 There are six volume levels plus a silent mode. You will hear the ring tone for each
level you select. If you select silent mode, an LED on the phone flashes when an
incoming call is received.
ADJUsTinG flAsH/R-PUlsE DURATion
The R pulse/Flash (Register recall) is used to request a new line from the PBX. Different
countries and PBXs may require different durations for activating the pulse. Duration
requirements should be specified in the technical data for the PBXs.
 Select MEnU > sETTinGs > flAsH (2,6).
 Select your choice and press oK to confirm.
Applicable settings:
100 ms – Scandinavia, Europe, Siemens HiPath
300 ms – Germany, France, Israel
500 ms – USA
sETTinGs