Krown Manufacturing 2000DLD - Manual (Page 17)

THE MEMORY (CONT.)
PRESS:
Sends the contents of a memory
area. (The diagram shows how to
send the contents of memory area 4.)
DELETING A STORED MESSAGE
You can erase (or “clear”) all of the information in a memory area by typing [CTRL] and [8] (clear).
You will be prompted to enter the number of the area to be cleared, and then asked to confirm that
you really want to erase the message stored there.
If you type [Y], the memory area will be cleared. You can type a new message in the memory area
you just cleared and save it by pressing [CTRL] and [9].
If you type [N], you will just see the letter [N] added to the display. Type [CTRL] and [9] or press the
[RETURN] key to clear the display.
Asks to clear memory area or
phone directory.
Choose area M1 (for example).
Yes: clear message. You can type
new message or press[CTRL]+[9]
to exit.
No: keep the information in memory.
Clear the screen.
VIEWING A STORED MESSAGE
To read a message stored in memory, you must first access the memory areas. Then you should type a
number to tell the Memory Printer where the message is stored. The area name (for example, M2)
will be shown on the right side of the display, and the message will be shown in the center of the dis-
play, with the cursor on the first character.
PRESS:
Accesses memory areas or
phone directory.
Chooses area M2 (for ex.)
You can use the arrow keys to move forward or backward through the text.
15
CTRL + 4 A STORED MESSAGE
CTRL + 8
CLR MEM, D(DIR)
1 CLEAR 1? Y/N
Y M1
N CLEAR 1? Y/N
RETURN _
CTRL + 5
MEM 1-5 OR D(DIR)
2 ABCDE M2