Krown Manufacturing 2000DLD - Manual (Page 21)

The Direct Connect feature saves
you time and gives you a better
connection. you can use your
Memory Printer without having to
place the telephone handset into
the acoustic cups. It also gives
you the choice of dialing from the
keyboard or from numbers stored
in the Phone Directory (see page
17 for information on storing
numbers in the Directory.)
To connect your Memory Printer to your telephone line, plug one end of your modular telephone cord
into the telephone wall jack. Plug the other end into either jack on the back of your Memory Printer.
After changing to Direct Connect, it is necessary to press the [SPACE BAR] or [SHIFT] + [DIAL] to
connect with the telephone line.
KEYBOARD DIALING
Turn the Power Switch ON.
The Memory Printer will automatically change to and remain in Direct Connect when you have your
TDD plugged into the telephone line.
PRESS:
TDD is now ready to dial
If the TDD is not plugged into the phone line, the screen will display:
Check the phone line and press
[SHIFT] + [DIAL] again.
The number is displayed.
TDD is now dialing.
If you make a mistake dialing, you must press:
The phone line is now cleared and
you may begin dialing again.
TDD is now ready to redial.
IV
19
DIRECT CONNECT WITH THE
MEMORY PRINTER
SHIFT + DIAL TYPE NUMBER OR A-Z
LINE NOT CONNECTED
5 5 5 1 2 3 4 NUMBER OR A-Z 5551234
RETURN DIALING...
CTRL + 9 DISCONNECT Y/N
Y DISCONNECTED
SHIFT + DIAL TYPE NUMBER OR A-Z