Kenwood KVT-911DVD - Manual (Page 28)

28
FM/AM Tuner Control Function
E Station Preset Memory
Store the frequency of the station currently
being listened to. You can then recall that
station with a single touch of a button.
Select the band/station that you want to have
stored.
Hold down preset station number [ 1 ] - [ 6 ]
that you want to use for the station, for two
seconds or more.
You can store 6 stations in each of the FM1,
FM2, FM3, and AM band.
Auto Memory Entry
You can automatically store all the receivable
frequencies in the band currently being
listened to, and then recall them with the
touch of a button later. This function is
especially useful when you are travelling and
do not know what stations are available. Up to
6 frequencies can be stored this way.
Select the band for auto memory entry.
Touch [ AME ].
Touch [ 4 ] or [ ¢ ] to start auto memory
entry.
The preset station numbers [ 1 ] - [ 6 ] are
shown in order.
When all the stations in a certain band are
stored in the preset memory, the auto memory
entry stops. The tuner then plays the last
station received.
Recalling a Preset Station
Touch the preset station number [ 1 ] - [ 6 ] for the
desired station. The number of the recalled station
is displayed.
Switching to the PTY Search Screen
Touch [ PTY ] to switch the PTY search screen.
(Page 31)
This function can't be used during a traffic
bulletin or AM reception.
NOTE
3
2
1
NOTE
2
1
Selecting the FM Bands
Touch [ FM ] to select the FM band.
Each time you touch [ FM ] , the band switches
between the FM1, FM2 and FM3.
Selecting the AM Band
Touch [ AM ] to select the AM band.
Selecting the Seek Mode
You can choose from three seek modes: auto
seek, preset station seek, and manual seek.
Each time you touch [ SEEK ], the mode switches
as follows:
▼
AUTO 1: Auto Seek Mode
▼
AUTO 2: Preset Station Seek Mode
▼
MANU: Manual Seek Mode
Tuning
Auto Seek Mode (AUTO1)
• Touch [
¢ ] to seek increasing frequencies.
• Touch [ 4 ] to seek decreasing frequencies.
Preset Station Seek Mode (AUTO2)
• Touch [
¢ ] to move to the next preset station.
• Touch [ 4 ] to move to the last preset station .
Manual Seek Mode (MANU)
• Touch [ ¢ ] to increase the frequency by one
step.
• Touch [ 4 ] to decrease the frequency by one
step.
The ST indicator is displayed when stereo
broadcasts are being received.
NOTE
J
J
G
C
F
A
D
Preset Band
Preset number Frequency
ST indicator
D C F E
AUTO 1/AUTO 2 /MANU indicator
Radio-Text/Program Service name/SNPS B G
H I K
TI indicator
L
CRSC indicator
J
FM/AM Tuner Control Screen
A
KVT_911DVD_Eng_01 02.1.25 2:25 PM Page 28