Kenwood KVT-911DVD - Manual (Page 46)

46
Audio Control Function
A Adjusting the High-pass filter for Rear
output
Adjust the frequency of the High-pass filter
Each time you touch [
] or [ ] to adjust the
frequency as follows:
THR (through) / 40Hz / 60Hz / 80Hz / 100Hz /
120Hz / 150Hz / 180Hz / 220Hz
Adjusting the High-pass filter for Front
output
Adjust the frequency of the High-pass filter
Each time you touch [
] or [ ] to adjust the
frequency as follows:
THR (through) / 40Hz / 60Hz / 80Hz / 100Hz /
120Hz / 150Hz / 180Hz / 220Hz
Adjust the frequency of the Low-pass
filter for Non-Fading output.
Adjust the frequency of the Low-pass filter
Each time you touch [
] or [ ] to adjust the
frequency as follows:
50 Hz / 80 Hz / 120 Hz / THR (through)
Setting the phase for Non-Fading
output
Each time you touch [ N-F Phase ] to switch the
phase as follows:
" NORMAL "
0°
" REVERSE "
180°
Returning to the Sound Effect Menu
Screen
Touch [ RTN ] to return to the sound effect menu
screen.
B
A B
E
C
D
C
D
E
Crossover Network Setting Screen
KVT_911DVD_Eng_01 02.1.25 2:25 PM Page 46