Printing the network configuration, Connecting to another kodak all-in-one printer – Kodak ESP 5200 User Manual
Page 15
Networking Your Printer
10
www.kodak.com/go/aiosupport
Printing the network configuration
To print the current network configuration:
1. Load plain paper into the printer. (See
2. Press
Home.
3. Press
to
select
Network Settings, then press OK.
4. Press
to
select
Print Network Configuration, then press OK.
Installing your printer on additional computers on the network
To add your printer to another computer(s) on your network, install the KODAK
All-in-One Printer Software on each computer. Go to
, and follow the on-screen instructions.
Connecting to another KODAK All-in-One Printer
If you are connecting to a newer model printer (for example, you have an ESP 7
printer and now you are adding an ESP 5250 printer), you must install the software
for the newer model.
If you are connecting to another ESP 5250 printer or to a previous model:
On a computer with WINDOWS OS:
1. Select
Start > All Programs > Kodak > Kodak Printer Network Setup Utility.
• If your wireless all-in-one printer (example: KodakESP5200+1133)
is not
listed:
a. Select
No, my printer is not listed, then click Next.
b. From the drop-down list, select your printer.
c. Select
Network - Wireless/WiFi, then click Next.
When your printer is detected, driver installation begins.
• If your wireless all-in-one printer (example: KodakESP5200+1133)
is listed:
a. Highlight the all-in-one printer that is connected to your network.
b. Select
Yes, my printer is listed, then click Next.
When your printer is detected, driver installation begins.
2. When driver installation is complete, click
Done.
On a computer with MAC OS:
1. Select
Apple > System Preferences.
2. Under Hardware, select
Print & Fax.
3. In the Print & Fax dialog box, click
+.
4. Select your printer from the list, then click
Add.