Monitoring and adjusting printer performance, Checking ink levels, Resetting factory defaults – Kodak ESP 5200 User Manual
Page 54: Checking ink levels resetting factory defaults, Resetting factory
www.kodak.com/go/aiosupport
49
KODAK ESP 5200 Series All-in-One Printer
Monitoring and adjusting printer performance
From the control panel, you can perform tasks to help keep the printer functioning
well.
Checking ink levels
To check the ink levels:
1. Press
Home.
2. Press
to select
Maintenance, then press OK.
3. With
Check Ink Levels selected, press OK.
The LCD shows approximate levels of ink in the cartridges so you know when it’s
time to order replacement cartridges.
Resetting factory defaults
To reset defaults to the factory default settings:
1. Press
Home.
2. Press
to select
Printer Settings.
3. Press
to select
Reset All Settings, then press OK.
4. When you see the message, “This will reset printer settings to factory defaults,”
press
OK.
NOTE: Resetting factory defaults does not change the date and time, language,
country/region, or network settings.