Kodak ESP 5200 - Manual (Page 43)

Scanning
38 www.kodak.com/go/aiosupport
4. Press to select an option, then press or to change the setting.
5. Press Start to make a scan.
The scanned file appears at the destination you specified.
Scan Option Settings Description
Scan To USB-connected
computer
(default) The scanned file is sent to the
USB-connected computer.
Name of computer
(only if a computer is
connected by
wireless network) The scanned file is sent to the
computer on the wireless or Ethernet
network.
Scan What Document
(default) Sets the scan settings for scanning a
document (see
Changing the scan
settings for scanning from the
control panel, page 34
).
Photo Sets the scan settings for scanning a
photograph (see
Changing the scan
settings for scanning from the
control panel, page 34
).
Destination File
(default) Sends the scanned file in the format
and to the location on your computer
that you designate (see
Changing the
scan settings for scanning from the
control panel, page 34
).
Application Sends the scanned file to Home
Center Software.
Save as Defaults No / Yes To save the settings as the new
default, press
OK. With Yes selected,
press OK.