Copying a photograph, Using the default settings to copy a photograph – Kodak ESP 5200 User Manual
Page 34
www.kodak.com/go/aiosupport
29
KODAK ESP 5200 Series All-in-One Printer
Copying a photograph
You can copy a photograph using the default settings, or you can adjust the quantity,
size, quality, and brightness of your copies.
Using the default settings to copy a photograph
The default settings are either the factory default settings (see
), or defaults that you have set on the printer (see Save as Defaults
at the bottom of the table under
Adjusting the settings and copying a photograph,
).
To copy a photograph using the current default settings:
1. Lift the scanner lid, and place the photograph face down in the right-front corner
of the scanner glass.
2. Close the lid.
3. Press
Home.
4. Press
to select
Copy Photo.
5. Press
Start to begin copying.