Konica Minolta Dimage A1 - Manual (Page 148)

148 D ATA - TRANSFER MODE
CONNECTING TO WINDOWS 98 / 98 SECOND EDITION
The driver needs only to be installed once. If the driver cannot be installed automatically, it can be
installed manually with the operating system’s add-new-hardware wizard; see the instructions on the
following page. During installation, if the operating system requests the Windows 98 CD-ROM, inset it
into the CD-ROM drive and follow the accompanying instructions on the screen. No special driver
software is required for other Windows operating systems.
AUTOMATIC INSTALLATION
Before connecting the camera to the com-
puter, place the DiMAGE Viewer CD-ROM
in the CD-ROM drive. The DiMAGE
installer menu should automatically acti-
vate. To automatically install the Windows
98 USB driver, click on the starting-up-the-
USB-device-driver-installer button. A win-
dow will appear to confirm that the driver
should be installed; click “Yes” to continue.
When the driver has been successfully
installed, a window will appear. Click “OK.”
Restart the computer before connecting
the camera (p. 147).