Konica Minolta Dimage A1 - Manual (Page 98)

Int. set –
Bracket set 0.3Ev
Data imprint Text
Imprint to Image + Exif
Inst.playback Off
Voice memo Off
98 R ECORDING MENU
DATA IMPRINTING
Data can be printed on a still image and saved to the file’s Exif data. The function must be activated
before the image is taken. Once activated, data will continue to be imprinted until the function is
reset; a yellow bar is displayed behind the frame counter on the monitors to indicate the function is
active. Data imprinting is selected in section 2 of the recording menu (p. 80). Data imprinting cannot
be used with TIFF or RAW images. Only one imprinting format can be used with each image.
Off
YYYY/MM/DD
MM/DD/hr:min
Text
Text + ID#
Menu option
Data imprinting function disabled.
Prints the date and time the image was taken.
To imprint alphanumeric characters. When this option is selected, the
electronic keyboard opens (p. 99).
To imprint text with a serial number. As each successive image is cap-
tured, the ID number will increase by one. When this option is selected,
the electronic keyboard opens (p. 99). The serial number is reset every
time this option is selected.
The data can be imprinted in the lower right corner of the image
when viewed horizontally as well as to the file’s Exif data, or to the
Exif data only. The Exif data can be seen with the DiMAGE Viewer
software. The imprinting location is selected with the imprint-to option
in section 2 of the menu.
Prints the year, month, and day the image was taken. The date format
can be changed with Date/Time set option in section 2 of the setup menu
(p. 30).
Imprinting
indicator