Konica Minolta Dimage A1 - Manual (Page 158)

158 T ROUBLESHOOTING
Problem Symptom Cause Solution
The camera will
not work.
Nothing displayed
on the data panel
or the monitors.
The battery are dead.
The AC adapter is not connected
properly.
Recharge batteries (p. 22).
Check that the adapter is connected to
the camera and a live electrical outlet
(p. 25).
The section covers minor problems with basic camera operation. For major problems or damage to
the camera or charger, or if a problem continues to reoccur frequently, contact a Minolta service facil-
ity listed on the back cover of this manual.
“Err” displayed on
the data panel. The camera is hot or it has been
left in a very hot environment.
Turn off the camera and allow it to cool.
If “Err” is still displayed on the camera
after it cools, remove and replace the
batteries or power cord.
Shutter will not
release.
“000” is displayed
on the frame
counter.
Memory card is full and unable
to store an image at the image-
quality or image-size setting on
the camera. Insert a new memory card (p. 26),
delete some images (p. 41), or change
the image-quality or image-size setting
(p. 82).
TROUBLESHOOTING
No-card warning
appears on the
monitors.
No memory card in the camera. Insert a memory card (p. 26).