Konica Minolta Dimage A1 - Manual (Page 72)

72 A DVANCED RECORDING
MEMORY - STORING CAMERA SETTINGS
To save the current camera settings, turn the function dial to the M
SET position and press the function button to open the register-
selection screen; the current camera settings are displayed.
Camera settings cannot be deleted from memory by turning the camera off. They are erased with the
reset function in section 3 or the setup menu.
On the register-selection screen use the control dials
or left/right keys of the controller (1) to select the
memory register in which to store the settings; any
previous settings are replaced. Press the central but-
ton of the controller (2) to complete the operation. The
menu button cancels the operation without saving the
settings.
:enter
Save to memory
:select
Five sets of camera settings can be saved. This saves time under frequently repeating conditions by
eliminating the need to set the camera. Except for functions like subject programs, data imprinting,
voice memo, and instant playback, most recording-mode camera settings will be saved including the
position of the Flex Focus Point, the display mode, and changes made with the function dial and digi-
tal effects control. Setting are displayed before being saved. Although the Digital Effects bracketing
drive mode setting can be saved, the type of bracket, contrast, color saturation, or filter, must be
reset with the Digital Effects Controller.
1
2