Konica Minolta IP-711 - Manual (Page 143)

9. Troubleshooting
134
Symptom Possible Cause Action
The watermark
cannot be printed. The watermark is not
correctly set. Check the watermark setting.
The watermark density is
set to a low level. Check the “Shading” setting.
Watermark may not be
printed in graphics
applications. No watermark can be printed
in this case.
Unable to specify
Staple. No staple can be made if
Media Type is Thick or
Transparency. Check the setting for each
item of the printer driver.
Unable to staple. The number of prints to be
stapled (with FS-135
mounted): Up to 30 prints. Change the Copies setting.
The number of prints to be
stapled (with FS-231
mounted):
A4 L (Letter L) Up to 50
prints
B4 L (Legal L) Up to 25
Prints.
The number of prints to be
center stapled (with FS-
231): Up to 10 prints.
No stapling can be
effected if the document
contains pages of different
sizes. Check the document.
The stapling position
is not what is
expected. Orientation setting is
wrong. Check the stapling position
on “Page Layout” of a printer
driver property sheet.